LYNX 6100LX Surgical Instrument Washer SIZE
Compartment usable space: 26” wide x 26" high x 29" deep
Overall Unit*”: 42" wide x 80" high x 36" deep Sliding Door(s)
improved operating efficiencies
larger usable chamber size
the LYNX 610 LX is... Manufactured in the USA
LOAD and UNLOAD LYNX 6100LX Surgical Instrument Washer CONFIGURATION (select one):
front load and unload pass through load and unload The The LYNX 610 LX Surgical Instrument Washer is provided with an unload door and an additional cycle status indicator on the unload end, allowing one-way product flow from the contaminated area to the clean area. The LYNX 610 LX Surgical Instrument Washer shall be provided with a combination of rotating jet spray and direct spindle spraying for all treatment solutions. The LYNX 610 LX Surgical Instrument Washer spray system consists of a single rotating spray arm mounted above, and interchangeable spindle wash or a rotating jet spray arms mounted below for internal treatment of the racked items. The bottom header automatically couples to the re-circulated wash/rinse treatment system.
LYNX 6100LX Surgical Instrument Washer VIEWING WINDOW
Washer door(s) shall be provided with a full view, tempered, double glass viewing window.
STAINLESS STEEL TREATMENT COMPONENTS
All treatment components, including jet spray system, screens, pump, and recirculating piping are constructed of 304 stainless steel.
LYNX 6100LX Surgical Instrument Washer PERSONNEL SAFETY FEATURES
Opening the load-end door (or unload-end if pass-through unit), automatically stops operation of the washer. The door(s) must be closed, alarm acknowledged, and the “Cycle Start” button depressed to continue operation. An Emergency Stop (ES) button is provided on the load-end control panel (and unload-end if pass-through unit). If the operations of the wash cycle are interrupted by depressing the (ES) Button, the operator must reset the button and push the “Cycle Start” button to continue operations from the beginning of the selected cycle.
MULTI CYCLE COLOR/GRAPHIC MICRO COMPUTER CONTROL SYSTEM
A solid-state microcomputer control system monitors and automatically controls all process operations and functions. A twelve-cycle treatment menu may be programmed and retained to permit operating personnel to accommodate a wide variety of loads and processing requirements. Individual cycle phase times and temperatures and other key process parameters are programmable. Each cycle may be locked by supervision to ensure process integrity. The Cycle programming may be controlled by a supervisory access code. Each cycle program may be reviewed on demand.
LYNX 6100LX Surgical Instrument Washer AUTOMATIC TREATMENT CYCLE
The standard treatment cycle consists of any or all of the following phases: Pre-wash, Wash, Rinse, Wash II, Rinse and Final Rinse. All cycle phases may be selected or deselected by the user. All Wash and Rinses treatments are re-circulated under pump pressure except the optional non-re-circulated rinse. The cycle, once activated, is completely automatic.
put surgical instrument washer productivity where you need it.
Countertop Surgical Instrument Washer
L100W Countertop Surgical Instrument Washer
L100W Undercounter Surgical Instrument Washer